Obi Official Forum › Obi Users Category › Obi Cloth v
Help  the Obi cloth has some compressive resistance

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thread Modes
Help  the Obi cloth has some compressive resistance
MakeLifeEasier Offline
General User
Posts: 4
Threads: 2
Joined: Jul 2023
Reputation: 0
#1
Yesterday, 08:09 AM
Hi Sir,
I have a question I would like to ask. I believe the Obi cloth has some compressive resistance, but I would prefer it to have sufficient flexibility. When dragging one corner inward, I do not want it to move the entire net, as shown in (https://flightpoint1.oss-cn-beijing.aliy...-51-21.gif). Some parameter settings are shown in the attached picture. Could you please provide some suggestions for modifications?

Best wishes,
Chuang from China


Attached Files Thumbnail(s)
               
Find
Reply
MakeLifeEasier Offline
General User
Posts: 4
Threads: 2
Joined: Jul 2023
Reputation: 0
#2
Yesterday, 10:16 AM
I found that the compressive resistance improved significantly when the particle mass was changed from 0.0001 to 0.00001. Huh
Find
Reply
josemendez Offline
Forum Admin
*******
Posts: 6,471
Threads: 27
Joined: Jun 2017
Reputation: 413
Obi Owner:
  • Rope
  • Cloth
  • Fluid
#3
Today, 08:00 AM
Hi!

Compressive resistance is controlled by the "max compression" parameter in the ObiCloth component. Yours is set tp 0.9 which means the rest distance between particles can get reduced up to 90% before they resist compression. Setting it to 1 will completely remove any compression resistance.

kind regards,
Website Find
Reply