Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Help  Rope twitching when torquing
#1
Bombilla 
Hi!

Goal: I want to tie the rope around some pillars and torque it as much as possible. However the rope starts twitching. 

Here is a video. You can see the rope twitching eventhough plenty of rope is left. If project files are requested I am happy to share. 

[video=youtube]http://https://youtu.be/w9YX9gTCd9c[/video]

Best,

Robert
Reply
#2
(29-06-2022, 05:34 PM)roberthey Wrote: Hi!

Goal: I want to tie the rope around some pillars and torque it as much as possible. However the rope starts twitching. 

Here is a video. You can see the rope twitching eventhough plenty of rope is left. If project files are requested I am happy to share. 

[video=youtube]http://https://youtu.be/w9YX9gTCd9c[/video]

Best,

Robert

Hi Robert,

I assume you're using surface collisions, right? Increase the "surface collision tolerance" in the ObiSolver, a value like 0.1 - 0.15 should yield good results. You can also try using a few more substeps to increase collision quality.

kind regards,
Reply
#3
(30-06-2022, 09:36 AM)josemendez Wrote: Hi Robert,

I assume you're using surface collisions, right? Increase the "surface collision tolerance" in the ObiSolver, a value like 0.1 - 0.15 should yield good results. You can also try using a few more substeps to increase collision quality.

kind regards,
Hi Jose,

will try and post how it goes. Thank you for your swift reply!

Best, Robert
Reply
#4
(30-06-2022, 10:02 AM)roberthey Wrote: Hi Jose,

will try and post how it goes. Thank you for your swift reply!

Best, Robert
Just tried it and it works perfectly. Thank you so much!
Reply