Help Grab Rope - VR

[Xanduffy]

Thank you for catching those mistakes! The script is no longer throwing null references but still the collisions only register towards one end of the rope, and if the pin constraints are being generated even then, they're not having any effect on the rope itself. It's quite strange that despite visibly pushing the rope around with my hand colliders, the "Collision" debug message that simply requires a solver and any collision event will not show unless the box collider I currently have on the hand touches the grapple's mesh collider as well as the rope. Are there any factors other than phase that can influence whether a collision is registered? I've set the phase to 1 on both control points at the beginning and end within the rope path, while the hands and the grapple are set to phase 0 on the inspector. In fact, the initial "Collision" message shows if I press the grab button while touching the hook and not the rope, should this be happening then they are both set to the same phase, or do the different phases only affect particle collisions? 

To clarify, when you tested the script were you able to achieve the grabbing effect we're aiming for through whatever input system you were using?

Thanks again, it's been said before but your customer support is top notch!