27-11-2017, 04:25 PM
(This post was last modified: 27-11-2017, 04:26 PM by ObiClothKenobi.)
I've been trying to add obi cloth physics to a piece of clothing that is a skin mesh to a rigged character model. Very much like the trench coat example.
However once I set everything up and press play the clothing suddenly scales and gets put in a different position. This happens even with every particle pinned and all obi cloth constraints disabled. If I remove the obi cloth component the clothing stays on the character on play.
Before play:
![[Image: d2f9b5ab67.jpg]](https://puu.sh/yuzDA/d2f9b5ab67.jpg)
After play:
![[Image: 48781c7ed8.jpg]](http://puu.sh/yuzEC/48781c7ed8.jpg)
The model can be found in FBX format here: http://puu.sh/yuzOW/fca0719257.fbx
Any help would be much appreciated!
However once I set everything up and press play the clothing suddenly scales and gets put in a different position. This happens even with every particle pinned and all obi cloth constraints disabled. If I remove the obi cloth component the clothing stays on the character on play.
Before play:
After play:
The model can be found in FBX format here: http://puu.sh/yuzOW/fca0719257.fbx
Any help would be much appreciated!