Help Performance issues

[josemendez]

Hey,

The drop is around 7-12 ms. Since you asked if I used 6 solvers in the scene I figured that was the problem. So I limited it to one and this now means that it no longer updates 12 times per frame but just one. I also tried setting the "Maximum Allowed Timestep" to the same as the "Fixed Timestep" (0.01388889. This number because it is the refresh rate of the Oculus Quest) but this did not help.

So all in all, while I did get the update count from 12 to 1, the time spent nor the fps were reduced.

Hi,

7 ms for a few ropes is not normal at all, so there must be something off. How big is the particle pool of your solver? In the rod screenshot I saw you were using 5000 particles... surely your rope/rod is not that dense? Try reducing it to somewhere around 500 (even less if your rod does not use up that many particles). That should save some time.

Anyway, I'm unable to reproduce this performance drop. I can take a look at your project if you wish. If possible, send a repro scene to support(at)virtualmethodstudio.com.