[SOLVED] Softbody mesh working weird when attached to chain (obi rope)

[eduardoseitz]

These only show the settings for the topmost rope, but there's 5 ropes in total? Or are the 4 lower ropes part of the softbody?
In case there's only one rope, it looks fine for me: the lower control point should be set to not collide with the softbody (setting it to collide with nothing is one way to achieve it).


Looks like the mass of the softbody is really high compared to that of the rope(s). Large mass ratios require more substeps to bee solved accurately - like in all physics engines-. An insufficient solver budget will result in spurious compliance (fancy word for unwanted elasticity).

Either use more substeps, reduce the mass of the softbody, or increase the mass of the ropes.

kind regards,

The chain is working thanks to you. I think what is wrong is the Obi Solver settings, could you check it for me please: https://drive.google.com/file/d/15pIRvbp...sp=sharing

In this settings the following bug occurs: https://drive.google.com/file/d/1P5cWqjA...sp=sharing

Thank you for all the help.