Help Rope twitching when torquing

[roberthey]

Hi!

Goal: I want to tie the rope around some pillars and torque it as much as possible. However the rope starts twitching. 

Here is a video. You can see the rope twitching eventhough plenty of rope is left. If project files are requested I am happy to share. 

[video=youtube]http://https://youtu.be/w9YX9gTCd9c[/video]

Best,

Robert

[josemendez]

Hi!

Goal: I want to tie the rope around some pillars and torque it as much as possible. However the rope starts twitching. 

Here is a video. You can see the rope twitching eventhough plenty of rope is left. If project files are requested I am happy to share. 

[video=youtube]http://https://youtu.be/w9YX9gTCd9c[/video]

Best,

Robert

Hi Robert,

I assume you're using surface collisions, right? Increase the "surface collision tolerance" in the ObiSolver, a value like 0.1 - 0.15 should yield good results. You can also try using a few more substeps to increase collision quality.

kind regards,

[roberthey]

Hi Robert,

I assume you're using surface collisions, right? Increase the "surface collision tolerance" in the ObiSolver, a value like 0.1 - 0.15 should yield good results. You can also try using a few more substeps to increase collision quality.

kind regards,

Hi Jose,

will try and post how it goes. Thank you for your swift reply!

Best, Robert

[roberthey]

Hi Jose,

will try and post how it goes. Thank you for your swift reply!

Best, Robert

Just tried it and it works perfectly. Thank you so much!