Help ObiRope Points

[Matbee]

Yes, google drive work fine. Any place that can host the video is.

The second video just shows some ropes colliding with each other. This should just work straight out of the box, there's no parameter you need to change.
 
-Maybe there's too many gaps in between particles, trough which ropes can pass trough each other? This can happen if your ropes are too tense or their resolution is too low. Add a ObiParticleRenderer component to them to visually debug the particles.

-Maybe particle collisions are disabled in the solver?

in the second video the ropes are very weak to bend, they are almost always straight, move slowly, practically do not spring

Here are some more examples
https://drive.google.com/drive/folders/1...sp=sharing

---

Yes, google drive work fine. Any place that can host the video is.

The second video just shows some ropes colliding with each other. This should just work straight out of the box, there's no parameter you need to change.
 
-Maybe there's too many gaps in between particles, trough which ropes can pass trough each other? This can happen if your ropes are too tense or their resolution is too low. Add a ObiParticleRenderer component to them to visually debug the particles.

-Maybe particle collisions are disabled in the solver?

https://drive.google.com/drive/folders/1...sp=sharing

here is the current setting of my rope