20-10-2021, 05:41 PM
(20-10-2021, 04:06 PM)Matbee Wrote: I made a small BoxCollieder and Rigidbody with constraints on rotation and movement in all axes. Now when I reach the maximum length of the rope, it no longer stretches, but its end is not rigidly fixed to the anchor point and the rope can move further, how can this be fixed? I pull the other end and it doesn't stop
How are you pulling the other end? Is the other end a dynamic attachment?
(20-10-2021, 04:06 PM)Matbee Wrote: I want to pull on the fork, but so that it does not move beyond some tension limit of the rope, I added a dynomial attachment to the anchorage point on the floor
This doesn't make any sense: adding a dynamic attachment to the floor will have no effect, since the floor is not a rigidbody, and the rope does not need to apply forces to the floor.
You must add the dynamic attachment to the fork, and pull from it using forces. As soon as the pulling force applied by you and the force applied by the rope cancel out, you won't be able to pull further.