27-10-2017, 10:28 AM
(This post was last modified: 27-10-2017, 10:31 AM by josemendez.)
(26-10-2017, 09:34 PM)aaamarkin Wrote: Hi, I have a problem with ropes not colliding with each other.
I wanted to reproduce this behaviour from working example
I've tried setting different layers to ropes,
I've experimented with solver distance, collision, particle collision and bending constraints iteration.
I've changed resolution from 0 to 1 and vice versa.
But all I've got is following Not working version
Solver params:
Rope params:
What correct settings should be to recreate behaviour?
Thank you.
Set particle collision iteration count to about 40, sequential mode.
Set distance iteration count pretty high too.
That's about it.