Manual tearing via cript

[josemendez]

Hi I tried
1- to disable the Obi Tether Constrains component from the chain = Tether constrains still appeared
2- Hit button Clear Tethers (The visualization didnt show tethered constrains) = When the chain breaks the weird behavior persists
3- Unticked "Enable" in the Tether Constrain Parameters of Obi Solver = weird behavior persists

pd, i tried to remove Tethers via script.
Is it possible to attach/instantiate a Handle at the end of the Teared ropes? that way I could attach a small rigid object and give a nice behavior without deleting Tether constrains

Hmm, that's weird. Have you tried enabling constraint visualization (the "visualize" checkbox in each constraint component) and see if there's any constraint still attaching both halves of the torn rope?

Unless I'm misunderstanding something, I don't see how adding rigidbody at the end of the rope would help you get rid of the weird behavior... at most you could keep the end of the rope static, but the rest of it would keep flailing.

Also try deactivating in the solver all constraints except distance constraints, then re-enable them one by one and see what's the one causing the issue.