Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bug / Crash  The fluid is intermitted and splitted in Obi 5.0.
#1
I found a something wrong with flow rate in Obi 5.0.

This is the flow in Obi 4.
[attachment=541]

And this is in Obi 5.
[attachment=542]

I think that the fluid should be continuous smoothly.
Is this the specification of Obi 5.0?
Reply
#2
(12-12-2019, 10:42 AM)asimofu_ok Wrote: I found a something wrong with flow rate in Obi 5.0.

This is the flow in Obi 4.


And this is in Obi 5.


I think that the fluid should be continuous smoothly.
Is this the specification of Obi 5.0?

Hi,

We changed simulation parameters in pretty much all scenes in 5.0 to make them a bit more efficient. So this is to be expected. Things like smoothing radius and particle size can affect the continuity of the flow.
Reply
#3
(12-12-2019, 11:32 AM)josemendez Wrote: Hi,

We changed simulation parameters in pretty much all scenes in 5.0 to make them a bit more efficient. So this is to be expected. Things like smoothing radius and particle size can affect the continuity of the flow.

I see.
I'll try to change them.

Thank you.
Reply