16-08-2017, 06:43 PM
(This post was last modified: 21-09-2017, 03:14 PM by lidiamartinez.)
Hi,
I am trying to use Obi Rope in a Windows Universal Application. I am aware that Obi Rope is not officially supported and does not build out of the box since ConvertAll is not available for Windows Phone (and thus Windows Universal). I was able to get around this and successfully build by creating my own ConvertAll method and replacing all instances with it.
However, when I try to run the application on the device the rope does not move because libOni is not loaded correctly. The exact error is
. Is there anyway I can make sure the Dll gets copied correctly?
Thanks in advance,
Fernando
I am trying to use Obi Rope in a Windows Universal Application. I am aware that Obi Rope is not officially supported and does not build out of the box since ConvertAll is not available for Windows Phone (and thus Windows Universal). I was able to get around this and successfully build by creating my own ConvertAll method and replacing all instances with it.
However, when I try to run the application on the device the rope does not move because libOni is not loaded correctly. The exact error is
Code:
DllNotFoundException: Unable to load DLL 'libOni': The specified module could not be found
Thanks in advance,
Fernando