13-06-2023, 10:26 AM
Hi.
I'm having mixed results AFTER moving and changing the lengths of rope. Rope is fine and simulates well until I alter the position / rotation and change the length of the rope. Then it freaks out.
Just to double check my process (sanity check):
1: Add Obi Rope to scene
2: Add blueprint
3: Adjust to desired thickness via 'thickness scale' in the Obi Rope Extruded Renderer
4: Rotate the 'Obi Rope' object say 90 on Z so it's vertical and move to position
5: Adjust length with start and end particles
Thanks.
I'm having mixed results AFTER moving and changing the lengths of rope. Rope is fine and simulates well until I alter the position / rotation and change the length of the rope. Then it freaks out.
Just to double check my process (sanity check):
1: Add Obi Rope to scene
2: Add blueprint
3: Adjust to desired thickness via 'thickness scale' in the Obi Rope Extruded Renderer
4: Rotate the 'Obi Rope' object say 90 on Z so it's vertical and move to position
5: Adjust length with start and end particles
Thanks.