ObiColliders and Procedural Load

[jonworks]

Well, OK, I suppose I can give up at this point and stick with the rope solution I had before.

I'd read about this problem as it relates to Obi before, but I figured it could be bypassed because mass ratio is always mentioned in the same sentence. I do not require the rope to have low mass. When you crank up the weight of the rope it starts to behave more like a heavy cable, which is exactly what you'd expect when lifting something really heavy. Adjusting the mass of the rope to keep the mass ratio within the simulation limit is how I got my current rope solution to work. But I guess it doesn't work with Obi.

Thanks,

Jon