Obi softbody catching on the edge of collider

[richienko]

Hi,
when I roll over edge of collider, the softbody will glitch out.
Two box colliders that are close together, and one is at the angle.
Here is setup:
https://drive.google.com/file/d/16Zr0FPN...sp=sharing
https://drive.google.com/file/d/1TewA4SM...sp=sharing

I'll send you video in PM in a minute if that's okay.

I tried increase thickness, but changing Thickness parameter of Obi collider is not presented in scene view. Only original collider is visible. 

Thanks.