Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Help  Rope lifting heavy objects
#6
(28-09-2020, 10:03 AM)mr-matt Wrote: Rope mass did the trick! Thanks!

Just keep in mind that, strictly speaking, having a 1000 kg object suspended from a 1000 kg rope behaves exactly the same as a 1 kg object suspended from a 1 kg rope. So by increasing rope's mass, you won't get the same behavior as you would with the original mass ratio and a lot of substeps to increase simulation quality.

The thing is sometimes you just need the behavior of a very heavy object suspended from a light cable/rope. This is what makes iterative solvers sweat.

But if you can get away with a heavy rope for your purposes, then no problem!  Sonrisa
Reply


Messages In This Thread
Rope lifting heavy objects - by mr-matt - 27-09-2020, 12:25 AM
RE: Rope lifting heavy objects - by josemendez - 28-09-2020, 07:42 AM
RE: Rope lifting heavy objects - by mr-matt - 28-09-2020, 08:42 AM
RE: Rope lifting heavy objects - by josemendez - 28-09-2020, 09:24 AM
RE: Rope lifting heavy objects - by mr-matt - 28-09-2020, 10:03 AM
RE: Rope lifting heavy objects - by josemendez - 28-09-2020, 10:18 AM