Help Particle passed through collider

[josemendez]

Thank you for your reply, in my case I have set the rope resolution to 1.0 and others stay at default. I would like to ask which property i should lower or increase in order to minimize this problem? Such as increasing the collider thickness, thanks.

Increasing the collider thickness (Note: actual thickness, not the thickness property, that will "fatten" the collider) will reduce tunneling. Decreasing the tilmestep, using more substeps, and increasing rope thickness will also help.

A rope resolution of 1.0 is fairly high, make sure you actually need that many particles. Quite often 0.5 or less is enough.