08-01-2018, 12:18 PM
I would like to make a physically accurate closed pulley system with 2 pulleys and one closed rope.
All physics and colliders are working except that I cannot get the rope to react to the pulley rotation.
Is this even possible with Obi Rope and/or how should I approach this?
![[Image: 1ii445dNDDSzaQWcR00kG_scJbCijUBoMfrU2AW4...17-h337-no]](https://lh3.googleusercontent.com/1ii445dNDDSzaQWcR00kG_scJbCijUBoMfrU2AW4UNnK7HNI9ynue6582f_xxrBkkcEBMPqByeyS_yqYYkDJ5yc_0lJkp__EzzkMikC7bfBoK1asZaq8muletnqxbIU1EVQtxFEKqdtlUTYTdTEw9YPhnUm2sg7EIVMgqPggxlcHF7k0ouPQwi9bcq6SrRo98e8cMsxUOQl9CZI0uvjp90xdgPna23c0bVwX8kfErzzjdFK0_2ahj6uNvBrsknJ4qY_ck8HcXEh_ccbca1-gSEub8z0NKzv2d87-VhVWqwjvH_iTsU7ufr1L33DuqxANgAIkrs71SviUr0D6m8Dq6wyC1Ed8EFas0Rluh6n0i1fuHzfruIyKlZWn6U9NfYEapqmX2H9XfqUBKH9yqoJkgcNlyGlbyZvQRNs5EUSsDryJAUf5eGaGdoqYkHNnxdMOFMUyXOU1bypX6Qh3x3uSl4SRbu9rMcY5sKKqGeegWYMQUHQpe-01_R6_uK1wsN_-Ry16KVNDB3QnSIEj_ysWZDcgesYXFZPnYbAdek0XpHRDl03AKZc-smLn-0oDuzxGms-25hX09rDrA1xIdlPjZ9SMgFw4m_7X2mYrvwR0TQFlyaVC7PKMiUHB21QOAN93eghxtFGUJ8Wcq6Zo_VOE5JslgqpDyWNTaQ=w817-h337-no)
All physics and colliders are working except that I cannot get the rope to react to the pulley rotation.
Is this even possible with Obi Rope and/or how should I approach this?