Help Change Rope Particle Transform

[josemendez]

Hi josemendez,

how to make 2 ropes collide with each other. In Sample Scene, there is an example but my ropes are not collide with each other. I did check all setting. All setting are same. but facing this issue.

thanks

Make sure they have different phases (and of course, enable particle collision constraints in the solver!). You can set phases per-control point in the path editor. See:
http://obi.virtualmethodstudio.com/tutor...sions.html
http://obi.virtualmethodstudio.com/tutor...setup.html