11-05-2023, 10:02 AM
Hello,
So I have one issue with my setup (check the attached video).
I am giving control inputs to all 4 ropes, with speed = 2 and time_dt = 0.01 with which I am controlling the ropes.
However as can be seen in the video, the attached object is falling slowly while the ropes are getting extending fast, creating an undesirable result.
I changed the speed to 1, which gives somewhat desirable output, but then the movement of the attached object is slow.
What I want is to move the object a bit faster but at the same time, the rope should also extend accordingly.
Video:
https://drive.google.com/file/d/1tO2XkxG...sp=sharing
So I have one issue with my setup (check the attached video).
I am giving control inputs to all 4 ropes, with speed = 2 and time_dt = 0.01 with which I am controlling the ropes.
However as can be seen in the video, the attached object is falling slowly while the ropes are getting extending fast, creating an undesirable result.
I changed the speed to 1, which gives somewhat desirable output, but then the movement of the attached object is slow.
What I want is to move the object a bit faster but at the same time, the rope should also extend accordingly.
Video:
https://drive.google.com/file/d/1tO2XkxG...sp=sharing