13-12-2021, 08:51 AM
(This post was last modified: 13-12-2021, 08:54 AM by josemendez.)
Your fluid settings will result in a extremely dense gas, nothing like chocolate at all:
Viscosity: 0.15 //<--- way too low for any viscous fluid. Try setting it to 1.
Buoyancy: -20 //<--- will turn your fluid into a -20 times denser than air- gas. Set to -1.
Atmospheric Pressure: 20 //<--- will cause your fluid to collapse into thick drops, due to the huge air pressure. Set to 0.
Also, you're using the included "high friction" collision material, which as the name implies has high friction but zero sticking. This will make your fluid slide right off any surfaces.
You can use the included "ViscousFluid" sample scene as reference for most if not all of your fluid/collision settings.
Viscosity: 0.15 //<--- way too low for any viscous fluid. Try setting it to 1.
Buoyancy: -20 //<--- will turn your fluid into a -20 times denser than air- gas. Set to -1.
Atmospheric Pressure: 20 //<--- will cause your fluid to collapse into thick drops, due to the huge air pressure. Set to 0.
Also, you're using the included "high friction" collision material, which as the name implies has high friction but zero sticking. This will make your fluid slide right off any surfaces.
You can use the included "ViscousFluid" sample scene as reference for most if not all of your fluid/collision settings.