23-06-2021, 12:26 PM
Am trying to simulate a hose with a nozzle on it. The nozzle has a rigidbody and also an obi collider and obi rigidbody attached.
On the robe there are 4 particle attachments 2 for the fire extinguisher and 2 attached to the nozzle. Both are positioned close to the ends of the rope.
Problem is that to rope end won't follow the nozzle when I move the nozzle (in VR). There is a slide delay when moving.
I've tried static as wel as dynamic for the attachments (and combinations) but nothing helps. Best results I get is with static because with dynamic the rotation for the rope and is way off.
Below you can see what I mean.
Does anyone has suggestions to fix this?
On the robe there are 4 particle attachments 2 for the fire extinguisher and 2 attached to the nozzle. Both are positioned close to the ends of the rope.
Problem is that to rope end won't follow the nozzle when I move the nozzle (in VR). There is a slide delay when moving.
I've tried static as wel as dynamic for the attachments (and combinations) but nothing helps. Best results I get is with static because with dynamic the rotation for the rope and is way off.
Below you can see what I mean.
Does anyone has suggestions to fix this?