Help 2D rope-rope collision goes through

[josemendez]

Hello I'm trying to stack two ropes on top of each other in 2D environment. I enabled both self-collision and surface-collision settings but ropes are still going through each other. What might be the cause of this problem?

Here is a video of the problem I am facing.
https://drive.google.com/file/d/1bma9Twc...sp=sharing

These are the settings I am using.

If you’re using Obi 6.1 or older, make sure the ropes have different phase values as explained in the manual:
http://obi.virtualmethodstudio.com/manua...sions.html

In the latest version(6.2) make sure the collision filters are set up properly:
http://obi.virtualmethodstudio.com/manua...sions.html