02-06-2021, 07:58 AM
(01-06-2021, 08:29 PM)matsborges Wrote: That's doing the trick, though it looks better and better the higher I put the damping.
The "submerged in thick jelly" look works for this project, but is there any technical concern to worry about with setting the damping at 0.999?
As long as it looks good, there's no downsides to using a high damping value. Performance wise there's no difference between low and high damping values.
Keep in mind though that a value of 1 means 100% of the kinematic energy is dissipated, which will result in the simulation freezing in place. You can get as close to 1 as you need.